ETA3408 Avoid puncturing the probe of the multimeter

In some cases, when it is impossible to find the test point and the outer sheath of the wire must be broken for signal testing, this tool can be used conveniently. The ETA3408 fully insulated quick piercing test clip can penetrate 0.25 to 1.5 mm insulated wires. The unique V-shaped wire groove design ensures that the position of the probe remains in the middle of the cable. The 4mm socket at the tail can be used with the test lead of a multimeter or oscilloscope. It is simple, safe and efficient. How to use: Insert the 4mm test cable into the end of the piercing probe, put the test cable into the V-shaped wire groove, release the button, and a very fine probe in the test tool can pierce the cable sheath and directly contact the inner conductor, so as to perform fast non-destructive detection of the signal inside the cable. After the test, release the button, remove the wire, and the pinhole left in the cable sheath can achieve insulation self-healing.No need to break the wire, non-destructive measurement-4mm socket connectionPiercing 3 to 8 mm diameter insulated wiresUsed for non-destructive cable testing of automotive circuit detection, power, and industryThe unique screw-in design ensures that the probe is pierced in the middle of the cable, which is very efficient.