ETA3410 Avoid puncturing the probe of the multimeter

In some cases, when it is impossible to find the test point and the outer sheath of the wire must be broken to test the signal, this tool can be used conveniently. The ETA3410 fully insulated quick piercing test clip can penetrate 1.5 to 4 mm insulated wires. The unique V-shaped wire groove design ensures that the position of the probe remains in the middle of the cable. The 4mm socket at the tail can be used with the test lead of the multimeter or oscilloscope. It is simple, safe and efficient. How to use: Insert the 4mm test cable into the end of the piercing probe, put the test cable into the V-shaped wire groove, release the button, and a very fine probe in the test tool can pierce the cable sheath and directly contact the inner conductor, so as to perform fast non-destructive detection of the signal inside the cable. After the test, release the button and remove the wire. The pinhole left in the cable sheath is easy to seal, and the high-quality insulation layer can achieve insulation self-healing.No need to break the wire, non-destructive measurement4mm socket connectionPiercing 1.5 to 4 mm diameter insulated wireUsed for non-destructive cable testing in automotive circuit detection, power, and industryUnique V-shaped wire groove design, unique V-shaped groove design, ensures that the probe is pierced in the middle of the cable, very efficient