ETA3409 Avoid puncturing the probe of the multimeter

ETA3409 is a 30Vac...60Vdc insulation piercing clip with a unique jack screw-in design that controls the penetration depth and minimizes damage to the insulation layer. This clip features contact with insulated wires without cutting or stripping the insulation layer, and the small hole left on the insulation is easily sealed with a red or black coded cap for easy identification. The banana socket that rotates when the needle is screwed into the wire will not twist the test lead. The 4mm socket at the tail can be used with the test lead of a multimeter or oscilloscope, which is simple, safe and efficient.No need to break the wire, non-destructive measurement-4mm socket connectionPenetrates 1.5 to 4mm diameter insulated wiresFor non-destructive cable testing in automotive circuit testing, power, and industryThe unique jack screw-in design controls the penetration depth and minimizes damage to the insulation layer.